Spotlight on precision: New trade fair "Make-to-Order Days" will première in Stuttgart in 2026
Make-to-Order Days (MTO Days), a new trade fair format for precision parts, contract manufacturing and machining, will make its début at the Stuttgart Trade Fair Center on 9 and 10 June 2026. A key industrial sector, which has been confronted with enormous pressure for innovation and adaptation for many years, will then have its own procurement fair for the first time.
The new buyers' trade fair is specifically aimed at decision-makers and buyers from future-oriented key industries – from traditional mechanical engineering and automotive technology through to defence, robotics and renewable energies. The focal point will be contract-based precision manufacturing whose importance for global value-added chains is growing continuously. "Technological changes, geopolitical challenges and the transformation of entire branches of industry are posing great challenges to many manufacturing companies. With Make-to-Order Days we are creating a platform which will react precisely to these changes – closely geared towards the needs of the industry and with a clear focus on the future," said Roland Bleinroth, President of Messe Stuttgart.
Clear message from the machining sector: backbone of industry as the focal point
According to the Machining Technology Cluster, the distinct positioning is paramount. "As an important economic factor, we are permanently striving towards innovative developments, new economic spheres, additional business areas and future-oriented technologies. In our capacity as the partner of the new buyers' trade fair MTO Days in Stuttgart, we are offering our members ideal conditions and opportunities in this respect," emphasized Ingo Hell, Chairman of the Executive Committee of the Machining Technology Cluster.
The partner associations have also welcomed the new trade fair format. Werner Liebmann, Managing Director of the German Turned Parts Industry Association, emphasized: "Make-to-Order Days will give our industry an important platform. Contracted-based manufacturing is the backbone of a large number of key industries – and will attract the necessary attention and networking through this format."
"Messe Stuttgart has been a reliable partner for our Association for many years – and the conditions for Make-to-Order Days are ideal, especially in the strong industrial area of Baden-Württemberg with its superb infrastructure. Contracted-based manufacturing has always been an important area of activity for toolmakers since their day-to-day business includes all competencies and high-end precision. We are therefore impressed by the trade fair concept: MTO Days provides an opportunity to present the offered services on a professional platform. We are pleased to act as a partner and will support this strong format with full conviction." Ralf Dürrwächter, Managing Director of the Association of German Tool and Mold Makers
Value-added through synergies: three trade fairs to be held concurrently
One special advantage: Make-to-Order Days will be held concurrently with CastForge, International Trade Fair for Castings and Forgings with Processing, and The Battery Show Europe. This will produce valuable synergies for exhibitors and visitors alike. Especially in associated fields of technology in which precise manufacturing plays a key role, new points of contact and interdisciplinary discussion opportunities are being created.
Clear structures for maximum visibility
Make-to-Order Days offers exhibitors a unique and clearly structured stand concept which is aimed specifically at efficient business initiation. Thanks to detailed service specifications with information about application areas, production processes, materials, certifications and batch sizes, potential customers can identify suitable suppliers beforehand and ideally prepare their attendance at the trade fair leading to precisely the right connections for sustainable business in addition to the welcome random trade fair contacts. Another highlight is the stand construction concept with all-inclusive packages: a uniform, modern design ensures equality and discretion among all exhibitors. Along with organizational support, service and communication measures are also integrated. Exhibitors can therefore concentrate on everything that really matters – business initiation with the right partners.
Accompanying program with the emphasis on practice
In addition to the traditional product exhibition, the new trade fair format focuses on knowledge transfer and networking. A technical forum will examine key topics in the areas of digitalisation, precision and manufacturing trends in a practical manner. The networking area and separate meeting rooms will provide ideal conditions for personal discussions, confidential negotiations and business transactions.
Registration is now possible
Exhibitors can now register for Make-to-Order Days 2026. Registration is easy via the official event website (www-mto-days.de) of Messe Stuttgart. Interested parties can find there all important information relating to stand packages, participation opportunities and the accompanying programme. Booking early will not only secure a place at the première, but also the benefits of high visibility and reach of the new trade fair.
From may 19th, overhead crane operator's license will be mandatory in all companies.
Aisem: "There's a risk of production shutdowns for some companies. It's necessary to ensure more adequate time and effective training support tools." Starting May 19, overhead crane operators in Italy, a professional category employing over half a million people, will also be required to be trained in accordance with the 2025 State-Regions Agreement (ASR 2025). Without this training, required by specific regulations, it will be impossible to practice the profession. Incidentally, the Ministry of Labor lists the May 19 date on its website, although based on the publication date of the ASR 2025 in the Official Journal, compliance effectively begins on May 25. This discrepancy in dates is creating uncertainty among operators regarding safety, an issue on which uncertain interpretations should not exist. Before the introduction of the new Agreement, training on the use of equipment such as overhead cranes was already required by the Consolidated Law on Occupational Safety (Legislative Decree no. 81/2008), but the choice of training program remained at the discretion of the employer . With the new Agreement, however, overhead cranes have been included in the list of work equipment for which specific, standardized, and predefined training is mandatory—both in content and in terms of hours—as is already the case, for example, for forklifts. However, significant critical issues have emerged in the practical implementation of ASR 2025. The timeframe allowed for compliance has proven too short given the vast number of companies involved. According to estimates by AISEM , the Italian Association of Lifting, Elevation, and Handling Systems affiliated with Anima Confindustria, over 150,000 overhead cranes are currently in operation in Italy, each operated and managed by different operators within the company. This creates a difficult-to-manage paradox: by law, all overhead cranes used by operators without adequate training, i.e., in line with the provisions of the ASR 2025, must be stopped, with serious operational repercussions for many companies. AISEM President Massimiliano Bariola comments: "The introduction of mandatory licensing for overhead crane operators raises regulatory and institutional controversies. The distinction between the previously required training and the current mandatory requirement, with standards set by interinstitutional agreements, creates uncertainty and difficulties of interpretation for businesses. It should also be considered that some companies may not yet be aware of this new requirement, given the short timeframe between the announcement of the requirement and the entry into force of the regulation. Given the large number of operators involved ," Bariola continues, " AISEM had asked the institutions for at least five years to complete the training courses, but this request was not granted. It is therefore necessary for the competent authorities to collaborate to ensure more adequate time and effective training support tools, in order to reconcile safety and production continuity." Matteo Frigo , lifting group leader within Aisem, emphasizes: "The operational difficulties in implementing mandatory training are evident and shared by the operators themselves. There is also a real risk of short-lived or poorly structured training courses being organized, which do not follow the correct required training path . We remind you that Aisem and its member companies are accredited training organizations , in full compliance with the provisions of the State-Regions agreement. At this time, open dialogue between regulatory bodies, companies, and trade associations is needed to prevent a measure designed to protect safety from becoming an obstacle to regular work activities. Aisem will continue to carefully monitor the evolution of the situation, confirming its commitment to complying with safety regulations and industrial development needs." AISEM is the Anima federated association that brings together the best national businesses for the construction and distribution of material handling, lifting, and hoisting machinery. It represents over 80% of the entire national production, approximately 40% of which is exported. ANIMA Confindustria is the trade organization within Confindustria that represents companies in the mechanical and related sectors, a sector that employs 224,000 people, generates a turnover of €59.1 billion, and will account for approximately 60% of exports in 2025 (Anima Research Office 2025 forecasts). The macro-sectors represented by ANIMA are: construction and infrastructure; material handling and logistics; food production; energy production; industrial production; and safety and environment.
Industriale.it certification