The valve industry gathered for the seventh edition of the IVS Valve Industry Think Tank.

Publié le 26/11/2025

The conference focused on the evolution of knowledge, emerging technologies, and the opportunities offered by new application markets such as geothermal energy, reaffirming Italy's role as an international hub for the development of the relevant industry.

The seventh edition of the IVS Valve Industry Think Tank, a discussion event that brought together leading figures in the industrial valve supply chain, took place in Bergamo on November 20th at the Confindustria Bergamo auditorium, within the Kilometro Rosso Innovation District. The event was promoted by IVS - Industrial Valve Summit, the leading international event dedicated to industrial valve technologies and flow control solutions.

The event, entitled "Towards IVS 2026: innovations, knowledge, and strategic networking," offered an exclusive preview of the scientific program of the sixth edition of IVS, which will take place from May 19th to 21st, 2026, at the Bergamo Exhibition Center. The meeting, attended by over one hundred experts and industry leaders, analyzed the key themes of technological innovation, industrial sustainability, and advancement of technical knowledge in the valves and components sector, reaffirming Italy's role as an international hub capable of supporting the development of this industry. Special guests at this edition were engineers from the Society of Petroleum Engineers (SPE), who brought a dynamic perspective on the future challenges of the energy and industrial sectors, enriching the debate with valuable contributions for the technical and scientific community.

The conference's technical partner is VALVEcampus, the training association for Italian industrial valve manufacturers, a sector that represents excellence in the competitive European context: with 139 companies, approximately 10,000 employees, and an annual turnover of €3.4 billion, the national industry generates over 36% of continental production. Lombardy is establishing itself as the productive heart of the sector, contributing nearly two-thirds of Italian output, with Bergamo as its hub. Over 100 specialized companies operate within a 100 km radius of the Province, generating more than 90% of the sector's Italian turnover and employing over 6,000 people.

The event opened with a speech by Claudia Persico, Vice President of Confindustria Bergamo with responsibility for internationalization, Europe, and gender equality, who outlined the role of Bergamo's industry in the international context. Luca Pandolfi, Project Manager at IVS, outlined the future trajectory of the Summit, demonstrating its evolution into a platform that combines technical updates, vision, and high-level relationships among supply chain stakeholders.

The conference aspect was highlighted by Francesco Apuzzo, President of the IVS 2026 Scientific Committee and President of VALVEcampus, who emphasized the value of research and the integration of industrial and engineering expertise. The technical program of IVS 2026 will be structured around six main thematic areas: standardization and regulatory development; Digital technologies applied to valves, actuators, and control systems; valve design and materials for extreme service situations; advanced sealing solutions for industrial valves; applications of artificial intelligence in mechanical design, supply chain, and manufacturing; and additive manufacturing.

Valeria Tirelli, President & CEO of AIDRO and Ambassador of Women in 3D Printing, followed with an updated overview of 3D additive manufacturing, illustrating the progress of regulations and the level of adoption of the technology in Oil & Gas applications. The focus then shifted to the new phase of geothermal energy development, thanks to discussions with William Palozzo (DG Impianti Industriali S.p.A.), Ernesto Petteruti (Chimec S.p.A.), and Piergiuseppe Fiore (Eni S.p.A.), who outlined a horizon in which Italy can play a leading role and which is characterized by significant opportunities, technical requirements, new investments, and potential impacts on the energy transition.

In the second part of the meeting, Marco Moiola of Bodycote addressed the erosion and corrosion of metal surfaces in Oil & Gas plants, emphasizing the importance of advanced treatments to extend component life and increase safety and efficiency. Davide Lamoure of QUAM then spoke, illustrating the physical and engineering rationale behind throttle valves, essential components for controlling pressure, flow, and erosion in extreme operating conditions. Fabio Ferrari of Score's next contribution explored the critical issues surrounding control valves, key elements for regulating industrial processes but subject to issues that impact performance and maintenance.

The day concluded with Sissi Bellomo, a journalist for "Il Sole 24 Ore," who offered a broad look at the Oil & Gas market, examining the current situation and the prospects for a sector called upon to redefine its balance in a changing global context.

Claudia Persico, Vice President of Confindustria Bergamo with responsibility for internationalization, Europe, and gender equality, commented: "IVS Industrial Valve Summit is an international success story and one of the key initiatives through which Confindustria Bergamo, together with its member companies, supports internationalization processes. The project stems from the shared vision of a group of local businesses that strongly expressed the need to strengthen their presence and competitiveness in increasingly complex and challenging global markets. The Think Tank has become a consolidated annual event for discussion on technical and market topics, while the Summit continues to grow, aiming to further expand the number of exhibitors and visitors for the next edition.

IVS is a local initiative that, starting from the valve industry, generates benefits for the entire Oil & Gas and energy supply chain."

Francesco Apuzzo, President of VALVEcampus, stated: "IVS Valve Industry Think Tank embodies the mission of our Association. It is a place for open discussion where opinions, innovations, and market expectations can be shared, but above all, a space to analyze opportunities, analyze scenarios, and define strategies with key players in the industry. This edition, VALVEcampus not only selected the speakers best suited to the priority topics, but also directly contributed to the development of the content. A key role was played by the collaboration with the Society of Petroleum Engineers, which fully participated in the development of the technical materials. Born as a forum for discussion, the event also confirms its role as a fundamental step towards the next edition of IVS. Last year, we presented the Scientific Committee and the key themes underlying the call for papers. Today, we have taken a step forward, delving deeper into the content of the panels that will guide the 2026 Summit program.

IVS - Industrial Valve Summit.

Founded in 2015 as a specialized event, IVS is now internationally recognized as a reference platform for the industrial valve supply chain. Over the past ten years, the Summit has grown in size, quality, and strategic impact, helping to strengthen the competitiveness of the national production district and the role of Italian manufacturing in global markets. The fifth edition, in 2024, attracted 15,000 participants from 69 countries (+25%) and 325 exhibiting companies (+13%) from 14 nations, with a significant increase in international attendance, doubled compared to 2022. IVS 2026 will mark a further step forward in the event's development. The Bergamo Fairgrounds' exhibition layout will expand to include two additional pavilions, and the program will extend across three full days open to the public, growing from a two-day exhibition to a full-fledged valve week. The scientific conferences will begin on the morning of Tuesday, May 19, and the pavilions will open their doors to the international valve audience. This evolution reflects the organizers' desire to meet the growing demand for content, networking opportunities, and qualified discussions. Signs of growth are confirmed by the registrations already received: the sixth edition is on track to set a new attendance record. Hundreds of Italian and international companies will be present in Bergamo, demonstrating the industry's confidence in an increasingly complex global environment.

VALVEcampus

VALVEcampus is the training association for Italian manufacturers of industrial valves and components for the Oil & Gas and Power Generation industries. Founded by six partners to promote and disseminate the technical culture of industrial valves among professionals, it operates as a training agency in the areas of design, technical standards, metallurgy, sealing systems, and auxiliary components for industrial valves. It currently has more than 40 members and organizes dozens of training courses and webinars each year. The Association has always been the key scientific partner of IVS - Industrial Valve Summit, for which it oversees the conference program. VALVEcampus aims to promote the know-how, professionalism, and international role that Italy plays within the supply chain with its many activities.

Pour plus d’informations: IVS - Industrial Valve Summit

Autres articles susceptibles de vous intéresser

Amb 2026: collaborative processes drive automation

Central topic: Automation: Patrick Schwarzkopf (VDMA) discusses collaborative processes, artificial intelligence, and automation for SMEs using no-code solutions. As manufacturing companies strive to make their processes more efficient and flexible, automation solutions play a key role, especially in areas where people and machines are increasingly collaborating. AMB 2026 addresses this key topic with a practical approach and demonstrates how collaborative processes are evolving across the entire metal cutting process chain. In this interview, Patrick Schwarzkopf, Director General of the VDMA Robotics and Automation Association, analyzes the key factors driving this evolution and provides an overview of the developments companies should keep an eye on. Automation as one of the three central themes: Collaborative processes are gaining increasing importance AMB : The robotics and automation industry is forecasting a 5% decline in revenue by 2026; nevertheless, pressure on manufacturing companies to automate their processes continues to grow. Why is now the right time to focus on collaborative processes, and what factors are driving companies to take this step? Patrick Schwarzkopf : It's true, we're still observing a marked caution in investments, due to several reasons: from geopolitical tensions to the well-known challenges related to the competitiveness of production sites. However, the trend toward automation remains unchanged. Demographic change will become even more evident in the coming years; this will make it necessary to automate an increasing number of activities to support the remaining qualified personnel. Only in this way can we remain competitive. The interaction between humans and machines will be crucial. The extremely rapid development of artificial intelligence (AI), particularly generative AI and so-called physical AI, opens up new possibilities, for example through agent AI (Agentic AI) and through the much simpler use and programming of automation solutions. AMB : For a long time, automation was primarily designed for large-scale production. Today, however, robotic solutions are a viable option even for small series. How far has this evolution come, and what does a small business actually need to introduce automation into its production process? Patrick Schwarzkopf : Automation for SMEs is making enormous strides. Technological developments in recent years have been extraordinary and have significantly reduced the barriers to entry for small and medium-sized enterprises. Typical scenarios are "low volume, high mix," characterized by low production volumes and a high degree of product diversity. In these contexts, it is crucial that programming can be performed quickly, easily, and without significant staff effort. Numerous no-code solutions exist today for this purpose, requiring no programming knowledge. Automation workflows can be configured via graphical interfaces with drag-and-drop functionality, while robot trajectories can be taught through manual guidance (hand-guiding) and memorized at the push of a button. Major manufacturers have long been offering solutions specifically designed to meet the needs of SMEs. Pragmatic configurations, such as a robot working overnight, are often sufficient, thus enabling a significant increase in productivity. The obstacle is often less technological than cultural: many companies continue to believe that automation is inevitably too complex or too expensive. This belief is now obsolete, because solutions already exist and are easily observed at specialized trade shows like AMB. A useful reference point, for example, is Go4Robotics, the online platform of the International Federation of Robotics (IFR). AMB : As programming and operation become easier, direct collaboration between humans and robots is also becoming increasingly practical. Today, the two increasingly work side by side, without the need for protective barriers: it was precisely the development of AI-supported sensor systems that made this approach truly feasible. What concrete changes does all this mean for the shop floor, and how should companies rethink processes and the role of people? Patrick Schwarzkopf : Collaborative robots (cobots) are now well established. In many applications, however, the term "coexistence" is more accurately used: humans and robots operate without barriers, enabling direct and safe interaction. We are now seeing a further level of even closer collaboration with humanoid robotics. AI is making extraordinary progress in this area: robots are increasingly capable of interpreting their surroundings and acting autonomously and appropriately. Although significant pioneering work is still needed, humanoid robots are gradually emerging from research laboratories and are already finding their first experimental applications in industrial settings. It will still be some time before this technology reaches full maturity for widespread use. At the same time, however, humanoid robotics is accelerating the evolution of close human-machine interaction, for example through the ability to communicate verbally with robots. AMB : Many of these developments are best appreciated by observing them live. In September, AMB will bring together the entire metalworking ecosystem in Stuttgart: manufacturers, users, and researchers under one roof. What contribution can this unique combination make to the wider adoption of collaborative automation? And why is a visit to the trade fair essential for all metalworking companies considering the introduction of automation solutions? Patrick Schwarzkopf : A look at the data clearly highlights its significance: according to the International Federation of Robotics (IFR), machine tending—the automatic loading and unloading of workpieces on machine tools—is one of the main applications of robotics. Over the past decade, new annual installations of robots for handling tasks on machine tools have increased from 14,500 in 2015 to 19,000 in 2024. Preliminary data from the IFR indicate that the trend will continue with significant, double-digit growth in 2025. The use of collaborative robots (cobots) has also increased significantly in recent years: in 2024, approximately 65,000 cobots were installed worldwide, representing 12% of all industrial robots. The most significant increases are being seen in mobile robotics, which enables the flexibly connecting different production machines, for example through mobile manipulators, i.e., mobile platforms equipped with a robotic arm. It's hard to find such a comprehensive, focused, and industry-specific overview as that offered by a specialized trade fair. At AMB, you can see and experience firsthand the automation solutions for metalworking by chip removal. AMB : Thank you for the interview, Mr. Schwarzkopf. Focus on automation at AMB 2026 in the Oskar-Lapp-Halle (Hall 6) Automation will be a key focus at AMB 2026 in nearly every exhibition hall: from machine tool manufacturers with automation systems to solutions for tools and clamping technology, such as automatic setup. A special highlight will be the Oskar-Lapp-Halle (Hall 6), which will house the "Automation and Handling Technologies" area. Numerous exhibiting companies—including FANUC, KUKA, Cellro, RoboJob, Wassermann Technologie, and many others—will present their latest solutions for production and process management. It's worth checking out the exhibitor list, as here, trade visitors can experience firsthand how robotics, collaborative automation, Industry 4.0 approaches, and the IIoT (Industrial Internet of Things) are evolving metal-cutting processes, introducing new solutions and driving innovation in the industry. About AMB Since 1982, AMB has presented the highlights of the international metalworking industry. "Where Metal Comes Alive" will once again be a fixture on the industry's agenda in 2026, this year from September 15 to 19. It is the international marketplace and meeting place for metalworking, showcasing the latest products, technologies, innovations, services, and concepts in all their facets. AMB is supported by the VDMA Präzisionswerkzeuge (Precision Tools), VDMA Software and Digitalization (Software and Digitalization), and the VDW Verein Deutscher Werkzeugmaschinenfabriken e.V. (German Machine Tool Builders' Association).

09/07/2026 En savoir plus

Ucimu assembly: in 2026 the italian machine tool, robot and automation manufacturing industry is exp

2025 proved to be a generally weak year for the Italian machine tool, robot, and automation manufacturing industry, with production essentially stagnating compared to the previous year. This disappointing result was driven by the sharp decline in exports. Domestic market activity fared better, driven by the recovery in demand, but despite double-digit increases, figures were still far from 2021-2022 levels. Despite this, the Italian industry in the sector confirmed its position, once again, as a major player on the international scene, ranking fifth in the world for production and consumption and fourth in exports. Forecasts for 2026 predict a modest recovery driven by improved collection performance on the domestic market, thanks in part to the availability of the Hyper-Depreciation program. Activity abroad remains weak. This, in short, is the framework outlined by Riccardo Rosa, President of UCIMU-SISTEMI PER PRODURRE, during the Shareholders' Meeting. The meeting was attended by Barbara Cimmino, Vice President of CONFINDUSTRIA for Exports and Investment Attraction, and Paolo Magri, President of the ISPI Scientific Committee. Both were moderated and interviewed by Rita Querzè, a journalist for Il Corriere della Sera. This was followed by a discussion between two young entrepreneurs, Luca Dadone and Elisa Stucchi, who shared their vision for innovation, using AI and augmented reality applied to the manufacturing world. Over 150 guests attended, including entrepreneurs and managers from the sector, institutional representatives, and journalists. THE 2025 FINANCIAL STATEMENTS According to the final data processed by the UCIMU Study & Business Culture Center, in 2025, Italian production of machine tools, robots, and automation systems reached 6,391 million euros, up 1% compared to 2024. Exports saw a significant decline, dropping 12% to €3,760 million. The export-to-production ratio fell to 58.8%, compared to 67.5% in 2024. In 2025, the main outlet markets for Italian offerings were: United States (572 million, -9%), Germany (274 million, -24.9%), France (204 million, +0.2%), Poland (188 million, +11.2%), Turkey (168 million, -11.5%), India (164 million, -11.6%), Mexico (158 million, -10%), Spain (147 million, -6.5%), China (110 million, -54.1%), Brazil (84 million, +15.9%). After two years of decline, Italian manufacturers' domestic deliveries returned to growth, reaching €2,631 million, up 28.1% from the previous year. This performance was driven by the recovery in domestic consumption, which rose 22.3% to €4,534 million. Imports stood at 1,903 million euros, up 15.1% compared to 2024. The share of domestic consumption covered by foreign supplies fell by three percentage points to 42%. Production capacity utilization declined, with the annual average falling from 77.3% in 2024 to 76.5%. The same trend was observed for the order book, which stood at 6.3 months of guaranteed production, compared to 6.5 months in 2024. The sector's turnover stopped at 9,330 million euros. THE 2026 FORECASTS According to forecasts developed by the UCIMU Study & Business Culture Center, 2026 will see a slight recovery in the Italian machine tool, robot, and automation manufacturing industry. All indicators will return to positive territory, but increases will still be limited. Production will reach €6.64 billion (+3.9%). Exports will remain at the previous year's level, reaching €3.785 billion (+0.7%). The positive trend in domestic deliveries by manufacturers will continue, expected to grow by 8.5% to €2,855 million, driven by Italian demand, which is expected to reach €4,870 million (+7.4%). Imports will also show a positive trend, reaching 2,015 million (+5.9%). THE ITALIAN MACHINE TOOL INDUSTRY BETWEEN GEOPOLITICAL INSTABILITY AND INCENTIVES Riccardo Rosa, president of UCIMU-SISTEMI PER PRODURRE, stated: "2025 was an overall disappointing year for Italian machine tool manufacturers, who had to contend primarily with a sharp decline in export sales. On the other hand, despite the recovery, domestic market activity was also unsatisfactory, partly due to the chaos surrounding Transition 5.0." "On the international front, geopolitical instability has made the activity of the sector represented by UCIMU particularly complicated, as foreign markets are the main outlet for its production." "That said, the events of recent years have subjected our businesses to a continuous stress test, training them to operate in unprecedented business conditions. For this reason too, " continued Riccardo Rosa, " we note that not everything that happens, directly connected to our world, impacts our business in the same way." DUTIES "The tariffs introduced by the Trump administration have had a manageable impact for us. The data shows it: in 2025 ," stated Riccardo Rosa, " sales in the United States are expected to drop by 9%. But the US remains, by far, the primary market for Made in Italy products in this sector. This is possible for several reasons: first, the United States does not have sufficient local production to cover domestic consumption and requires advanced, highly customized technology; furthermore, at this particular moment in history, the defense sector, a strategic sector for the country and therefore exempt from paying duties, is experiencing fairly buoyant demand. These three factors have allowed, and continue to allow, Italian manufacturers to continue operating in the American market, which has always appreciated the characteristics of our offering." "This doesn't mean ," the president added, " that the critical issues have been eliminated. For the types of machinery also produced by American manufacturers, the tariff is clearly a heavy burden that has limited sales of Made in Italy products in this sector. But that's not all. Trump's trade policy has had some significant indirect effects; for example, the increased cost of some raw materials applied by other countries in response to the tariffs, an increase that also impacts our business." EUROPE AND THE AUTOMOTIVE INDUSTRY "Managing the impact of wars and the weakness of a key market like Europe has proven more complicated. In the case of wars, the most obvious example for us manufacturers is the disappearance of Russia from our radar. In 2013, before the invasion of Crimea and the first sanctions, it was our fourth-largest export market, with €177 million in exports. In 2022, it was our eighth-largest destination market (with €99 million). Since 2023, it has been absent and, more importantly, it is a market we have given away to Chinese manufacturers. Who knows if, once this wound at the heart of Europe is healed, we will be able to recover at least some of the lost ground." "And speaking of Europe ," stated Riccardo Rosa, " we are dangerously approaching the risk of deindustrialization. The absolutely questionable decisions made by EU authorities regarding the electric automotive transition are increasingly showing their concrete effects. At a time when the younger generations' concept of transportation is profoundly changing, with the car no longer considered a status symbol but a means of travel, European government bodies, with their dirigiste attitude, have effectively allowed Asian offerings to invade spaces previously reserved for our manufacturing sector. Before the effects become irreversible, we ask those who represent and govern us in Europe to rethink their approach, which must be based on the principle of technological neutrality, thus allowing the automotive supply chain, and its entire extensive supply chain, to properly manage the ongoing transition not only with respect for the environment but also, where possible, safeguarding the jobs of those employed in the industry." "Aside from the car to which it is so closely tied, Germany, the sick man of Europe, may be seeing the light at the end of the tunnel. In the first quarter of 2026, the machine tool orders index, compiled by the German association, rose 15.1%, breaking a negative trend that had lasted three consecutive years. The recovery plan promoted by Chancellor Mertz and the defense support plan are restoring confidence in the country. Let's hope this is indeed the case, because if the German locomotive restarts, we, the first carriage of this train, are ready to hook up to it and continue working in the Made in Germany production chains, which travel along very long routes, distributing our production everywhere in the world." THE HORMUZ CRISIS "While we await the terms of the agreement and are aware that it will take time for freight transit to resume its normal pace, the impact on our business is currently manageable, and we are confident that the easing of tensions in the Middle East will bring significant benefits to our companies. In terms of direct business, the region accounts for approximately 30% of exports to Asia, so a return to "normalcy" will boost our business in the region, where metal forming technologies are in particular in demand in response to major infrastructure development plans. Indirectly, the resumption of freight transit will allow for a gradual reduction in procurement costs, which have risen sharply in recent months." THE ITALIAN MARKET AND INCENTIVES "In a crucial moment like the one we are experiencing, with decidedly weak foreign demand, the domestic market becomes even more important for our companies. The availability of the Hyper-Depreciation measure provided for by the new Transition Plan 5.0, now fully operational, is an excellent tool to support Italian demand for new machine tools." We must say that 2026 had started off on a really challenging note: domestic order intake had dropped significantly, 29% compared to the January-March 2025 period. However, the feeling was that demand had stalled. In this first month of Hyper-Depreciation, with the GSE Platform now operational, we've already seen a shift in attitude among our Italian customers. This confirms what we've been saying for some time: Italian demand is there, but customers were waiting for clarity before they could place their orders. The incentive is now working. On the sidelines of the Mechanics Roundtable convened by the Ministry of Business and Made in Italy at the end of June, it emerged that 90% of the total resource reservation requests entered into the platform were for investments in machine tools. Good news! MIMIT deserves recognition for having developed, albeit belatedly, an easy-to-use, three-year measure. Finally, Italian companies have an industrial policy measure that allows for medium-term planning for both producers and investors. The hope is that its use will allow Italian demand to return to the high levels of 2021-2022, thus also ensuring the proper updating of our industry, which requires continuous innovation to remain competitive in the international market, where digital technology and AI are redrawing the rules of the game.

09/07/2026 En savoir plus

Jimtof 2026

From October 26 to 31, the 33rd edition of JIMTOF, an international exhibition dedicated to the machine tool sector and considered one of the world's leading international technology fairs, will take place at Tokyo Big Sight. Covering an area of 118,540 square meters, there will be 944 exhibitors at a total of 4,423 booths, including 725 Japanese and 219 international, organized by product category. The exhibitor list is published online on the official website www.jimtof.org. The previous 2024 edition attracted 162,670 visitors. Manufacturing professionals, by registering in September on the trade fair website, will be able to experience firsthand and gather information on the most innovative technologies, from machine tools to accessories. JIMTOF 2026 will feature metal cutting and forming machine tools, machine tool accessories, cutting and wear-resistant tools, diamond and CBN tools, grinding wheels and abrasives, gears and gearing devices, hydraulic, pneumatic, and hydraulic machinery, precision measuring machines and instruments, optical measuring instruments, testing machines, and CAD/CAM. JIMTOF has been a highly popular event that has been held every two years for over fifty years, a well-established trade fair renowned for its ability to provide visitors with information on a wide range of products used in the manufacturing industry. by Marinella Croci

06/07/2026 En savoir plus

The valve industry gathered for the seventh edition of the IVS Valve Industry Think Tank.

Autres articles susceptibles de vous intéresser

Amb 2026: collaborative processes drive automation

Ucimu assembly: in 2026 the italian machine tool, robot and automation manufacturing industry is exp

Jimtof 2026

Dati Legali

Sede Legale

Registro Imprese

Contatti