IVS - INDUSTRIAL VALVE SUMMIT: presented the sixth edition of the event

Publié le 23/04/2026
IVS - INDUSTRIAL VALVE SUMMIT: presented the sixth edition of the event
The leading Summit for the industrial valve and flow control industry returns, scheduled at the Bergamo Exhibition Centre, in Italy, from May 19th to 21st, 2026

A new record in exhibitors has been reached, with 416 companies (+30% vs. 2024), including nearly 100 international firms (+56%)

Two additional halls bring the total to four, an extra exhibition day, and a 30% increase in technical-scientific conferences, covering frontier topics such as AI, hydrogen, renewables, CCUS and nuclear, both next-generation and conventional

A preview of the IVS-Prometeia Observatory “The Oil & Gas Valve Industry in Italy” 2026 was presented


The press conference presenting the sixth edition of IVS - Industrial Valve Summit, the leading international event dedicated to industrial valve technologies and flow control solutions, was held in Milan. The event, promoted by Servizi Confindustria Bergamo and Promoberg, will take place at the Bergamo Exhibition Centre, in Italy, from May 19th to 21st, 2026.

IVS 2026 marks a further step forward in the event’s growth trajectory: Summit organizers anticipate record figures, starting with participating companies. A total of 416 exhibitors (+30% vs. 2024) from 20 countries will attend: alongside Italy, Spain, Germany, France, the UK, the USA, the Czech Republic, Poland, the Netherlands, Portugal, Austria, Belgium, Canada, Croatia, Finland, Ireland, Mexico, South Africa, Turkey and the UAE. The international component is expanding significantly, with around 100 companies (+56%), representing the highest foreign participation ever recorded.

The exhibition layout at the Bergamo Exhibition Centre will expand with two additional halls, bringing the total to four and reaching a surface area of 21,400 square meters - approximately 40% larger than the previous edition. The program will extend to three full days open to the public, evolving from a two-day exhibition into a full-fledged “valve week.” This development reflects the organizers’ intention to meet the growing demand for content, networking opportunities and high-level industry dialogue.

The strategic value of IVS - Industrial Valve Summit lies in its role as a true forum for the entire supply chain, where shared objectives and distinctive technical expertise converge, fostering dialogue among companies, institutions, research bodies and international operators. In a context marked by geopolitical tensions, the Summit takes on an even more relevant role as a platform for alignment and scenario analysis, offering stakeholders a qualified space to interpret ongoing dynamics, assess impacts across the supply chain and guide industrial strategies. In this context, the initiative plays an enabling role, strengthening the competitive positioning of the national manufacturing system and facilitating access to industrial relationships and development opportunities on a global scale.

The decision to anchor the event in Bergamo - a key industrial district - follows a clear rationale aimed at enhancing a highly specialized production ecosystem. Over the years, the event has established itself as a driver for territorial promotion, generating a network of side initiatives that extend its impact beyond the exhibition days, contributing to lasting positive effects for the local area.

Scientific program
Thanks to the scientific contribution of VALVEcampus - the association dedicated to training industrial valve manufacturers and a long-standing partner of the Summit - IVS 2026 will offer a technical program positioned at the forefront of innovation, designed to address the sector’s most pressing challenges. Particular attention will be given to emerging technologies and opportunities in new application markets such as hydrogen, nuclear, CCUS (Carbon Capture Utilisation and Storage) and renewable energy - key strategic drivers for industrial development.

The overall agenda includes 68 events (+30% compared to 52 in 2024), including conferences, roundtables and technical sessions, structured around six main thematic areas: standardisation and standard development; digital technologies applied to valves, actuations and control; valve design and materials for severe services; advanced sealing solutions for industrial valves; AI applied to mechanical design, procurement and manufacturing; additive manufacturing.

Additional sessions will address key topics such as sealing-material innovation, fugitive emissions and the impact of PFAS substances. A dedicated focus on AI will include seven conferences exploring its applications across different industrial contexts, alongside contributions on decentralized production and additive manufacturing.

The Summit will also host four high-level technical roundtables on subsea valve actuation in deepwater environments, choke valve applications in high-pressure systems, control valve performance and safety in critical applications, and surface treatment technologies to enhance resistance to erosion and corrosion. A further roundtable will focus on nuclear energy, involving regulators, companies, associations and institutions, with insights on both next-generation (Small Modular Reactors) and conventional nuclear technologies.

Partnerships
International participation is further supported by synergies with ICE Agency, AVR ANIMA, Confindustria Assafrica & Mediterraneo and UNIDO ITPO Italy. IVS has also entered into agreements with BVAA (the association representing valve actuators manufacturing, servicing, industry suppliers, stockists and industrial valve distributors in the UK), Fluidex (the Spanish association of exporters of fluid handling equipment, process solutions and technologies), SPAP (the Polish industry association for companies operating in the industrial valves and fittings sector), CzechTrade (the Czech government agency for trade promotion), Evolen (the French association of companies and professionals serving Energies), CEIR (the European association of valve manufacturers), SPE (Society of Petroleum Engineers - Italian Section) and ESA (European Sealing Association), also through the presence of country pavilions.

These partnerships will bring international delegations of institutional representatives, entrepreneurs, decision-makers, speakers and specialized operators. Organizers have invited qualified buyers from leading End Users and EPC contractors, creating a platform for interaction across the entire energy sector. This also opens opportunities for entry into and consolidation within emerging markets, particularly in Africa, where demographic growth and increasing energy demand make it an area of growing interest for supply-chain development.

The history of IVS
From 5,700 visitors in 2015 - the first edition, which hosted 100 companies - to 8,000 in 2017 and 10,800 in 2019, the Summit has experienced steady growth, both in attendance and in participant quality. In 2020, as preparations for the fourth edition were underway, the Covid-19 pandemic forced a halt. The exhibition centre was converted into a temporary hospital, supporting the community and strengthening the regional healthcare system. The 2021 edition was postponed to 2022, when IVS reached a new milestone: 12,000 visitors from over 60 countries and nearly 300 exhibitors (+17% vs. 2019), confirming its growing relevance despite ongoing mobility restrictions.

The fifth edition in 2024 recorded 15,000 participants (+25%) from 69 countries and 325 exhibiting companies (+13%) from 14 nations, with international attendance doubling compared to 2022.

Preview of the Observatory “The Oil & Gas Valve Industry in Italy” 2026
A preview of the 2026 edition of the IVS-Prometeia Observatory “The Oil & Gas Valve Industry in Italy,” developed with the contribution of the Research Department of Confindustria Bergamo, was presented. The report highlights the state of the Italian industrial valve sector, confirming it as a strategic segment of national manufacturing and a benchmark within the European competitive landscape.

The industry includes 140 companies, over 10,000 employees and a production value consistently exceeding €3 billion. With approximately 38% of total European production (up from 36% in 2024), Italy confirms its leadership in the Oil & Gas valve market, ahead of Germany (30%) and France. Lombardy stands out as the sector’s production hub: within the Province of Bergamo and a 100 km radius, 90% of the national sector’s total turnover is generated.

The year 2024 remained highly favorable, marking a third consecutive double-digit increase in sales (+14% vs. 2023), supported by backlog from previous years and a strong improvement in profitability: EBITDA margin reached 11.5% (+2.5 pp vs. 2023 and nearly doubled, compared to 2022). The trend continued in 2025, with growing investments across the Oil & Gas value chain and new opportunities in renewables, nuclear, data centers and space.

Despite trade tensions linked to US tariff policies, exports maintained a growth profile (+5.2% overall and +2% in the US, which accounts for 13% of exports). The outlook for 2026 is more uncertain: the Middle East, representing over a quarter of Italian exports, remains central but highly exposed to geopolitical risks. Tensions with Iran and potential disruptions in the Strait of Hormuz could affect investment timing and priorities, with implications for order dynamics.

The full Observatory will be presented on May 19 at the opening of IVS 2026.

IVS Young
IVS - Industrial Valve Summit 2026 actively promotes the involvement of local high-school students through the IVS Young project, aimed at bringing younger generations closer to a strategic industrial sector. The initiative includes several activities, from the “Roberto Brevi Scholarship for Education in the Valve Industry”, supporting students of ITIS Pietro Paleocapa in collaboration with OMB Valves, to the “Electronics diagnostic controller for industrial valves” project, developed with students of Istituto Ettore Majorana and Starline. These are complemented by company visits designed to provide direct insight into production processes, as well as IVS RadioAut, the official radio of the event, created in collaboration with Spazio Autismo, a key organization supporting people with autism spectrum disorders and their families. Together, these initiatives demonstrate a structured commitment to bridging education and industry, contributing to the development of technical skills and the enhancement of local human capital.

Statements
Giovanna Ricuperati, President of Confindustria Bergamo, stated: “The sixth edition of IVS sets a new record, with a 30% increase in exhibitors compared to 2024. This result confirms the event’s growing international appeal, with broader participation from abroad and new countries involved. Despite a complex global context that could affect visitor flows, registration figures remain encouraging. The event thus reaffirms its role as a key meeting point for the industrial valve community, providing a forum to discuss market scenarios, innovation and new applications. For Confindustria Bergamo, IVS growth is not an end in itself, but part of a broader strategy to enhance and strengthen local industrial supply chains. It is a concrete response to a need expressed directly by companies: increasing their visibility in international markets. Analysing supply chains, engaging entrepreneurs and building targeted support initiatives are central to our role, and IVS represents a concrete and successful example in this respect.”

Luciano Patelli, President of Promoberg, commented: “The strong growth recorded in the 2024 edition, combined with the high quality of participating companies, confirms the soundness of the project. The Summit is a flagship in the internationalisation path of Promoberg and the Bergamo Exhibition Centre, thanks to the large number of high-profile operators from around the world. As an exhibition venue, we are proud to play a role in supporting the economy and promoting Bergamo, contributing value to the territory both in terms of development and economic impact. Today, our exhibition centre represents a significant added value, located at the heart of one of the world’s most important macro-regions and a key mobility hub, also thanks to BGY international airport, which connects Bergamo with Europe, the Middle East and North Africa. Our development policies and strategies, including the expansion of the exhibition centre, will allow us to further support the growth of the Summit, generating even greater benefits and economic impact for the local area.”

Francesco Apuzzo, President of VALVEcampus, stated: “VALVEcampus confirms its role as a reference point for the Summit’s scientific programme, with content increasingly aligned with the sector’s concrete needs and capable of anticipating technological and industrial challenges. Our objective is to strengthen dialogue between industry, research and end users by providing practical, immediately applicable content. The 2026 programme will focus in particular on innovation, digitalisation and the evolution of materials, with an approach that prioritises real cases, operational experience and direct exchange among the different players in the supply chain. The international dimension of the event is also growing, increasingly positioning it as a meeting point for companies, EPC contractors, end users and academia, with contributions from international experts and operators. Alongside technical content, education and youth engagement remain central, as key factors for the sector’s development. VALVEcampus confirms itself as a knowledge platform for the entire valve ecosystem, where added value lies in the quality and independence of content. With this approach, we contribute to strengthening IVS’s positioning as a leading international event for the industry.”
Pour plus d’informations: IVS - Industrial Valve Summit
IVS - INDUSTRIAL VALVE SUMMIT: presented the sixth edition of the event
IVS - INDUSTRIAL VALVE SUMMIT: presented the sixth edition of the event
IVS - INDUSTRIAL VALVE SUMMIT: presented the sixth edition of the event
IVS - INDUSTRIAL VALVE SUMMIT: presented the sixth edition of the event

Autres articles susceptibles de vous intéresser

From may 19th, overhead crane operator's license will be mandatory in all companies.

Aisem: "There's a risk of production shutdowns for some companies. It's necessary to ensure more adequate time and effective training support tools." Starting May 19, overhead crane operators in Italy, a professional category employing over half a million people, will also be required to be trained in accordance with the 2025 State-Regions Agreement (ASR 2025). Without this training, required by specific regulations, it will be impossible to practice the profession. Incidentally, the Ministry of Labor lists the May 19 date on its website, although based on the publication date of the ASR 2025 in the Official Journal, compliance effectively begins on May 25. This discrepancy in dates is creating uncertainty among operators regarding safety, an issue on which uncertain interpretations should not exist. Before the introduction of the new Agreement, training on the use of equipment such as overhead cranes was already required by the Consolidated Law on Occupational Safety (Legislative Decree no. 81/2008), but the choice of training program remained at the discretion of the employer . With the new Agreement, however, overhead cranes have been included in the list of work equipment for which specific, standardized, and predefined training is mandatory—both in content and in terms of hours—as is already the case, for example, for forklifts. However, significant critical issues have emerged in the practical implementation of ASR 2025. The timeframe allowed for compliance has proven too short given the vast number of companies involved. According to estimates by AISEM , the Italian Association of Lifting, Elevation, and Handling Systems affiliated with Anima Confindustria, over 150,000 overhead cranes are currently in operation in Italy, each operated and managed by different operators within the company. This creates a difficult-to-manage paradox: by law, all overhead cranes used by operators without adequate training, i.e., in line with the provisions of the ASR 2025, must be stopped, with serious operational repercussions for many companies. AISEM President Massimiliano Bariola comments: "The introduction of mandatory licensing for overhead crane operators raises regulatory and institutional controversies. The distinction between the previously required training and the current mandatory requirement, with standards set by interinstitutional agreements, creates uncertainty and difficulties of interpretation for businesses. It should also be considered that some companies may not yet be aware of this new requirement, given the short timeframe between the announcement of the requirement and the entry into force of the regulation. Given the large number of operators involved ," Bariola continues, " AISEM had asked the institutions for at least five years to complete the training courses, but this request was not granted. It is therefore necessary for the competent authorities to collaborate to ensure more adequate time and effective training support tools, in order to reconcile safety and production continuity." Matteo Frigo , lifting group leader within Aisem, emphasizes: "The operational difficulties in implementing mandatory training are evident and shared by the operators themselves. There is also a real risk of short-lived or poorly structured training courses being organized, which do not follow the correct required training path . We remind you that Aisem and its member companies are accredited training organizations , in full compliance with the provisions of the State-Regions agreement. At this time, open dialogue between regulatory bodies, companies, and trade associations is needed to prevent a measure designed to protect safety from becoming an obstacle to regular work activities. Aisem will continue to carefully monitor the evolution of the situation, confirming its commitment to complying with safety regulations and industrial development needs." AISEM is the Anima federated association that brings together the best national businesses for the construction and distribution of material handling, lifting, and hoisting machinery. It represents over 80% of the entire national production, approximately 40% of which is exported. ANIMA Confindustria is the trade organization within Confindustria that represents companies in the mechanical and related sectors, a sector that employs 224,000 people, generates a turnover of €59.1 billion, and will account for approximately 60% of exports in 2025 (Anima Research Office 2025 forecasts). The macro-sectors represented by ANIMA are: construction and infrastructure; material handling and logistics; food production; energy production; industrial production; and safety and environment.

19/05/2026 En savoir plus

35.bi-mu: the list of exhibitors will be online soon, with many new features for an edition packed w

The 35.BI‑MU event is approaching, the international biennial dedicated to the industry manufacturing metal cutting and metal forming machine tools, robots, automation, digital and additive manufacturing, auxiliary and enabling technologies, scheduled at fieramilano Rho from 13 to 16 October . Five months before the event, numerous companies have already confirmed their participation, including several major confirmations and returning industry leaders. The focus of the exhibition, promoted by UCIMU and organized by EFIM-ENTE FIERE ITALIANE MACCHINE, will be the latest-generation, digitalized, and interconnected machines and technologies that integrate Industry 4.0 solutions, automation systems, and AI, enabling typical digital factory processes. The exhibition will be set up in pavilions 22 and 24 of the Fieramilano Rho exhibition center ; with the possibility of extending to pavilion 13, directly opposite the two currently occupied. In addition to machine tools, there will be seven technology themes: RobotHeart, dedicated to robotics, automation, components, systems, and artificial intelligence, sponsored by SIRI; AMITALY, dedicated to the entire additive manufacturing supply chain, sponsored by AITA; BI-MU Digital, digital solutions for the smart factory, with advanced software, connectivity and data security technologies, sensors, and self-adaptive systems; Metrology and Testing , offering measuring instruments, testing machines, and machine vision; Power4Machines, dedicated to components for mechanical, electrical, and pneumatic transmission, sponsored by FEDERTEC; Heat and surface treatments , systems and equipment for improving material performance; and, new to this edition, Tool Tech, dedicated to advanced tools for efficient, high-precision production. The exhibition offering will be rounded out by an overview of Revamping & Retrofitting , presenting a selection of machines and systems appropriately reconditioned and enhanced to meet the needs of the second-life market, complementary to the "new" market. Alongside the technology exhibition, 35.BI-MU will present a series of thematic cultural initiatives of interest to visiting professionals. With the proliferation of trade fairs and networking initiatives organized by individual companies at their own locations, the trade fair world is moving towards an increasingly hybrid formula that brings product presentations closer to the "cultural offering," which, for this edition of BI-MU, will feature numerous new activities. In addition to the meetings dedicated to the technological trends characterizing the machine tool, robot and automation manufacturing industry, and the presentations of new products by individual companies, new features at this edition of BI-MU are the Forums dedicated to two of the sectors characterized by the most interesting development potential and particularly lively demand: Aerospace & Defense and Energy . The two events entitled “90 minutes with the world of Aerospace and Defense” , scheduled for Wednesday 14 October , and “90 minutes with the world of Energy” , on Thursday 15 October , will each see a comparison between four representatives of some of the main large, medium and small sized companies, covering the broad spectrum of companies that make up each sector. The current challenges, the main production process needs of companies operating in these sectors, and the specific requirements for production technology suppliers are some of the questions the roundtable participants will address. With these forums, BI-MU broadens its horizons, offering industry professionals attending the fair, through the voices of some of the key players in these sectors, a detailed discussion of the most interesting business opportunities for exhibitors. Furthermore, the event will take place when the hyper-depreciation incentive is fully operational, thus benefiting from the benefits associated with this measure, which will certainly support domestic demand, which has been stalled in recent months. The Education and Skills project is confirmed for young people, with its highlight being ROBOTGAMES , the automation and robotics competition promoted by UCIMU Academy and organized by EFIM for secondary school students, now in its second edition. On Thursday, October 15, the 12 finalist teams, from 11 schools across the country, will compete "innovatively," presenting their robotic automation project applied to industry. The area dedicated to schools invited to participate in BI-MU, with free or tutor-led visits, will feature a series of meetings dedicated to the new generations over the four days of the fair. For students attending Higher Technical Institutes (ITS), AITA - Italian Association of Additive Technologies and EFIM are promoting the Additive Future Lab , a new national competition that introduces young talent to additive manufacturing technologies, which are increasingly central to industrial processes. The awards ceremony will take place on October 16th in the AMITALY area. Another new feature of this edition will be the BI-MU FUTURETECH AWARDS , a prize that celebrates the most innovative manufacturing solutions presented at the fair. The competition is open to exhibitors at 35.BI-MU, who will compete in three categories: mechanical innovation, digitalization, and sustainability. This initiative highlights the event's value as a platform for documenting and anticipating technological advancements in industrial manufacturing. All the awards ceremonies, together with the cultural and thematic in-depth meetings, will be hosted as always in the BI-MUpiù Arena , which will also be the venue for the inauguration of the event scheduled for the morning of Tuesday 13 October . To make it easier for operators to reach the fair, including by train, a high-speed train stop will be activated directly at the fairgrounds for this edition of BI-MU. Updated information is available on bimu.it

19/05/2026 En savoir plus

Enshu ge460/480 he: the formula 1 of machining centers

ENSHU is a historic Japanese brand synonymous with precision worldwide, but its presence in Italy is a recent development. EMIL MACCHINE UTENSILI introduced it to industry professionals at MECSPE 2019, the year of its debut and exclusive import rights. Why did EMIL MACCHINE UTENSILI believe in this manufacturer? - because ENSHU has over 1,200 engine block production lines installed worldwide - over 850 production lines for cylinder heads - because it is a historic supplier of Toyota, Nissan, Yamaha and Suzuki - because in the United States it is used by giants like GM and Ford - because it serves the entire Southeast Asian market - because it has a European headquarters in Germany, just a stone's throw from us - because they are considered the “Formula 1” of work centers A jewel of Japanese engineering. A sprinter by definition. The ENSHU GE460 and GE480 He models are considered the "Formula 1" of machining centers. While many machines travel at 40-60 m/min, these reach rapid speeds of 90 m/min with 1G acceleration. What does this mean? Money and competitiveness! At 90 m/min (an insane speed for a machining center), idle movements are almost instantaneous. For example, if a part has 30 different holes, saving half a second per movement means saving entire minutes on each individual piece machined. In processes with many short, frequent movements (typical of component manufacturing), the machine doesn't have time to brake before it's already started again. Productivity increases because movements are optimized, not forced cutting. Statistics indicate that at the end of the day, 15 to 20% more parts can be produced because the machine is "faster" at moving between one phase and the next. The thermal stability of ENSHU machining centers is the secret of their precision. Place a glass of water on the casing of an ENSHU while it is running at 90 m/min. It does not move . The thermal stability and smoothness of these machining centers are legendary. ENSHU is renowned for its excellent heat management. While other manufacturers strive to save weight to reduce costs, ENSHU creates machines with a mass that prevents vibration. It uses high-density cast iron bases, cooled ball screws, temperature-controlled spindles, and an inverted T-frame design that offers superior structural rigidity. The peace of mind of a productive investment. We know that buying an ENSHU machining center is a difficult financial decision. Other centers may cost less initially, but what about after a few years? Do you know when an investment is safe? When the risk is low, the return is consistent, and the value lasts over time . An ENSHU machine is the safest investment a company can make today because: It is designed for life cycles exceeding 20 years of continuous production. If you add together the purchase price, the reduced energy consumption, the minimal maintenance, and the increased productivity, you discover that the cost per single piece produced is lower than other machines. The value of its used is guaranteed, because the market knows that the precision of an ENSHU remains intact over time. EMIL MACCHINE UTENSILI's BEST SERVICE? Another important guarantee. At EMIL MACCHINE UTENSILI, we've always placed great importance on after-sales service and original spare parts. Experience has taught us that ensuring operational continuity is essential for workshops. This is how BEST SERVICE was born, a technical assistance program designed to ensure maximum efficiency and minimal machine downtime: - Specialized technicians ready to intervene within 36 hours of the call. - A remote assistance service for rapid machine recovery resolution. - 3 scheduled maintenance packages to prevent breakdowns, extend machine life, and maintain high production standards and precision. - A spare parts warehouse with a wide range of original components ready for delivery. Request information: vendite@emusrl.com Check out ENSHU on the website: https://www.emilmacchineutensili.it/it/prodotti-servizi/macchine-asportazione-truciolo/fresatura/enshu

05/05/2026 En savoir plus
Abonnez-vous à notre newsletter
Pour rester à jour sur les dernières nouvelles du monde industriel
Contactez-nous
Newsletter Image Lindustriale
Dati Legali

L'industriale s.r.l.
P. IVA: 12212870153
Codice Fiscale: 12212870153

Sede Legale

Via Carlo Dolci, 32
20148 Milano (MI)
Italy

Registro Imprese

Iscrizione R.I.: 12212870153
REA: MI-1539011
Capitale sociale: Euro 10.400,00 i.v.

Top
This website is protected by reCAPTCHA, therefore the Google privacy policy and terms of service apply.